Dometic RM 2652 with dino micro P-711
It works on electric. When switched to propane it lights (I can see the flame) and then goes off after 10 seconds. Dometic RM 2652 Dinosaur micro P-711
Forum Discussion
Flame Proving is failing..
When flame lites it generates a milliamp signal that circuit board MUST sense or DC gets dropped off gas valve so no raw fuel accumulates
Flame Proving signal return path is via spark electrode
soot/carbon on electrode, loose/bad wire/connection electrode to circuit board, cracked ceramic insulator, bad ground (electrode mounting screw provides ground)
All about flame proving/spark electode
When flame lites it generates a milliamp signal that circuit board MUST sense or DC gets dropped off gas valve so no raw fuel accumulates
Flame Proving signal return path is via spark electrode
soot/carbon on electrode, loose/bad wire/connection electrode to circuit board, cracked ceramic insulator, bad ground (electrode mounting screw provides ground)
All about flame proving/spark electode
