I used my Fluke meter and got 13.2v at the 12v block. Then I got 13.2v at the yellow wire going into the reignitor with the yellow wire plugged in. I could here the reignitor pulsing but no spark at the electrode. When I bought the electrode it said it was Dometic and had a Dometic model number. I wonder if it could be a fake or something like that. When I first hooked it up I got just a small spark for a short while. Then after adjusting it some it quit sparking at all. Even just trying to hold it with insulated pliers and moving it at different distances to the metal I could not get it to spark. Of coarse with gas shut off. Here is a couple of pics the way it is right now. Having trouble posting pics. Will try again after while. Thanks
