Dumba$$
In prepping for a long trip I crawled under the RV and saw some screw that had popped through the thermal cover down there, causing the cover to sag in places. The small washers originally installed ...
Forum Discussion
bucky wrote:
The cross member appears to also hold the tank laterally. If that is the case you are probably dealing with an edge leak that is not flat. That is going to greatly complicate things.
Is the cross member bolted or welded in place at the frame rails? Bolted makes things easy, welded not so much.
Good luck with it.
Can't tell because I have not removed the thermal cover down there.
