Dumba$$
In prepping for a long trip I crawled under the RV and saw some screw that had popped through the thermal cover down there, causing the cover to sag in places. The small washers originally installed ...
Forum Discussion
If you can support the tank and remove a supporting angle you could then move the tank enough to allow the flex seal tape to be wrapped around the bottom corner of the tank for a temporary fix.
All three tanks on my trailer have 2 angles supporting them running from the left I beam to the right I beam.
One angle is bolted in place the other is welded in place.
All three tanks on my trailer have 2 angles supporting them running from the left I beam to the right I beam.
One angle is bolted in place the other is welded in place.
