Kober
May 20, 2018Explorer
Dumba$$
In prepping for a long trip I crawled under the RV and saw some screw that had popped through the thermal cover down there, causing the cover to sag in places. The small washers originally installed ...
mobeewan wrote:Bobbo wrote:
While this can't help you, you have helped me. I am preparing to screw some stuff to the floor of my RV in one of the closets. The water heater is in that closet and the water lines come up out of the floor. I have bought this Phone/Computer Endoscope so I can look under the floor before drilling to locate the water lines.
You might give a review of it when you use it. I'm looking at something similar, but I haven't purchased it yet.
I bought a Ryobi TEK4 inspection camera about 3 years ago since I already had a Ryobi TEK4 screw/drill driver that used the same battery. The camera works okay for what I've used it for so far but but it's a bit awkward and the cable is a bit short. You have to twist on the camera as you flex it to keep the camera orientation on the screen. It looks like later versions have a skinnier camera and thinner flexible cable.