Effect of no absorption on LiFePo4?
I bought a low end 100Ah LiFePo4 a couple of years ago. The manufacturer only listed charge and float voltages on their spec sheet. Later I asked them about absorption and they told me 14.4v. They ...
Forum Discussion
Some LiFePo4 batteries recommend an absorption stage, it gives the BMS cell balancer time to work. The voltage region that most BMS balancers work in is so high on the charge curve that actual balancing might only last a minute or two. Here's what Battleborn recommends:
https://battlebornbatteries.com/programming-a-victron-smartsolar-charge-controller/
Bruce
https://battlebornbatteries.com/programming-a-victron-smartsolar-charge-controller/
Bruce
