Electrical Assistance with a furnace please
Hi all, I just installed a new Suburban NT20 furnace and I need some help with the wiring. There's only four wires, red (hot) yellow(grnd) and two blue which are for the t-stat. My issue is that the ...
Forum Discussion
Okay, I tried it and no go. I have a suspicion that I didn't get it grounded well enough. If that's not the case than either A. the furnace I just bought is bad or B. the hot lead coming in has issues. Are there any other possibilities I should look at?
I actually just installed a new thermostat a few days before the old furnace died. (The old furnace just stopped lighting the blower motor was fine) The new thermostat is Heat only White Rodgers
I actually just installed a new thermostat a few days before the old furnace died. (The old furnace just stopped lighting the blower motor was fine) The new thermostat is Heat only White Rodgers
