Electrical Assistance with a furnace please
Hi all, I just installed a new Suburban NT20 furnace and I need some help with the wiring. There's only four wires, red (hot) yellow(grnd) and two blue which are for the t-stat. My issue is that the ...
Forum Discussion
Again don't hate me please. I get the setting for the multimeter thanks for that. I'm hooked up to shore power. I've got a converter and circuit breakers up towards the front of the rig. The furnace sits under a bench/seat about mid rig. I have one live wire that runs that span to power the furnace. If I set the meter for 20 DCV range and touch the red lead to the end of the live wire do I just ground the black lead?
