Engine Computer Connector
My ECM has 2 connectors, a 14 way connector and a 60 way connector. The 14 way connector was compromised by techs prior to, or early in my ownership, probing the wire insulation. Eventually wire...
Forum Discussion
Probably won't happen till January as I'm flying east for the holidaze soon. I'll Deoxit the connector before then, but Until those pins no longer wobble on the circuit board, I will fear the stall.
I want a 100+ watt iron before attempting to reflow solder, I only have a 40.
I'd love to have those gremlins exorcised, as I might have felt better about driving somewhere less crowded for the incredible swell hitting the coastline:
Taken from my driver's seat Yesterday. It was supposed to be raining and howling onshore winds, Instead it was sunny and offshore.
Rainmageddon, run for the hills, panic and go shopping people, just dont stop shopping!!, says the guy who wants a real soldering gun.
Aaaahhhahhhhhaaaaaaaaaaaaaaaaaaaaaaaaaaa!!!
I want a 100+ watt iron before attempting to reflow solder, I only have a 40.
I'd love to have those gremlins exorcised, as I might have felt better about driving somewhere less crowded for the incredible swell hitting the coastline:
Taken from my driver's seat Yesterday. It was supposed to be raining and howling onshore winds, Instead it was sunny and offshore.
Rainmageddon, run for the hills, panic and go shopping people, just dont stop shopping!!, says the guy who wants a real soldering gun.
Aaaahhhahhhhhaaaaaaaaaaaaaaaaaaaaaaaaaaa!!!
