(Even More) Gizmo Tomfoolery
This stuff actually works excellently. It should be in every tool box. Repairs bad connections in control boards, thermostats. et al. You can find it on eBay.
Forum Discussion
No...Not when wet
And putting both leads on one connection will not give me the resistance between the connection and the circuit
But I was able to measure resistance between the connection and the other end of the circuit trace.
So two connections with increased resistance on an rf input at micro volt level, did degrade the signal slightly
I don't think there would be any problems where there is a powered circuit
And putting both leads on one connection will not give me the resistance between the connection and the circuit
But I was able to measure resistance between the connection and the other end of the circuit trace.
So two connections with increased resistance on an rf input at micro volt level, did degrade the signal slightly
I don't think there would be any problems where there is a powered circuit
