Everpure head QL3 replaced..
I had to replace the QL3 head, and I made a mental note. I know, that was not a good ideal. But replacing the new QL3, I think the input water goes to the back of head then flows with the arrow to ...
Forum Discussion
Yes, the arrow indicates water flow direction.
Don't know what kind of RV you have but usually the output of the Everpure goes to a goose neck water spout next to the kitchen sink faucet. So you're only using filtered water for drinking and cooking, not dishes, wash water, or rinsing off things. And the ice maker.
After the water spout, the plastic pipe goes to a shut off valve, then onto the ice maker valve behind the refer.
Don't know what kind of RV you have but usually the output of the Everpure goes to a goose neck water spout next to the kitchen sink faucet. So you're only using filtered water for drinking and cooking, not dishes, wash water, or rinsing off things. And the ice maker.
After the water spout, the plastic pipe goes to a shut off valve, then onto the ice maker valve behind the refer.
