Expected Amps with MPPT
BlueSky 3000 manual says for a rule of thumb, "... Ignoring conversion losses the conversion process produces an output current roughly equal to PV current times the ratio of PV voltage to battery...
Forum Discussion
Almot wrote:
Yeah, well... I like reading test results, but sometimes reports from the BFL Research Center are not easy to understand. Or - why this is even important ;)...
May I suggest getting a proper MPPT controller with a proper display that shows panel amps In, controller amps Out, and watts for those who need them.
Sorry Almot, it is all about Science. :) I will test in future, my MPPT Eco-W controller in 24v vs 12v and that against the PWM Solar30 in 24v mode. Of course I have to do that twice, when panel temp is 44C and when it is 51C so it may not be until July when I get that all solved.
Right now at Rathtrevor again (Jan, Feb, and now Mar) wondering why anyone would go to Mexico to get away from this (seals, herring, eagles, killer whales, pilot whales, geese, gulls). Oh well, to each his own!
