Expected Amps with MPPT
BlueSky 3000 manual says for a rule of thumb, "... Ignoring conversion losses the conversion process produces an output current roughly equal to PV current times the ratio of PV voltage to battery...
Forum Discussion
JiminDenver wrote:
It's been 77 F here (25c) but not today. In any event my results are off due to altitude.
Unless you secretly got that fancy controller once planned, you don't have the input readings anyway. Unless you have a clamp-on ammeter.
What is of interest ( :) ) is the many Forum members here who have the extremely expensive MPPT controllers and all the read-outs imaginable, who won't post figures to show they are not having the same problem I am having.
They love snickering about the "Chinese junk" Eco-W and how that is no doubt the problem, but never post their own figures to prove it!
I suspect they are afraid to check their own set-ups in case they find the same thing happening with their fancy controllers, and would be too embarrassed to post their results. :)
I am not complaining about the Eco-Worthy as such. I suspect there is something else going on--but that could still be only with my set-up--no way to know in this vacuum of comparable info. :(
