Fan for fridge
I am installing an ARP protection system on my Norcold and the unit has built in fan control. The fridge has an existing little fan mounted in the middle of the back side between the upper and lowe...
Forum Discussion
ScottG wrote:
Good point about the different temp set point OB.
I know your familiar with these things; what temp setting would you use for the roof fan?
They say it's preset to #5 for the sensor to be on the second to bottom tube. Good nuff?
#5 is same as Norcold OEM.....On/130*F - Off/115*F
I would test it at the same setting....checking to see IF the ARP controlled fan comes ON at same time as Norcold OEM fan
Then change ARP Fan setting to coincide with Norcold OEM
Suspect you will end up on #4/#3 setting so both fans run together
