Fridge issue
We overloaded our generator and while the genny was running, nothing was working. Simply hit the reset and everything worked- except the fridge & furnace. Found a blown fuse, replaced it and the furna...
Forum Discussion
MEXICOWANDERER wrote:
It's a BATTERY DC ISSUE. Meaning anywhere from the battery to and through the control board.UNPLUG FOR SAFETY. Then go outside to the access panel and check 12 volt wire going into refrigerator. Does it have power?
Correct. 120 volts has NOTHING to do with operation of the refer control panel. From your description, you had a POWER surge from the Genset and the higher voltage caused the Power Converter to surge the 12 volt output and blew some fuses. Odds are the blown fuse is on the Norcold rear control board behind that black box. Doug
