Forum Discussion
Old-Biscuit
Aug 20, 2015Explorer III
I would remove these covers from vent......they are used to restrict air from blowing flame out while traveling. They may be part of issue. Keep them to reinstall IF needed.

I would close up the open 'gap' where ignitor wire goes into burner area.
That 'gap' looks like it would funnel air flow directly in and 'push' flame over to backside which would then trip thermal-fuse

I would keep 'air foil' in place

I would close up the open 'gap' where ignitor wire goes into burner area.
That 'gap' looks like it would funnel air flow directly in and 'push' flame over to backside which would then trip thermal-fuse

I would keep 'air foil' in place
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,330 PostsLatest Activity: Oct 30, 2025