glennemay
Apr 08, 2016Explorer
Furnace help
I have a hydroflame 79/80 in my 1996 Lance 11.5. It worked great last year before I unlocked her for the winter. I just put it back on and off course New England is not going to let go of cold nigh...
glennemay wrote:glennemay wrote:
I have a hydroflame 79/80 in my 1996 Lance 11.5. It worked great last year before I unlocked her for the winter. I just put it back on and off course New England is not going to let go of cold nights. I need to get it workind get again.
The fan kicks on as it should. I have formed the instructions in the manual to a T with one exception. I do not have a valve that I can turn on and off on the gas line.
A I can assume is that this is some sort of automatic valve system that flows fuel when it needs to.
I get no ignition in the furnace athe all.
If anyone has any suggestions I am open. To almost anything.
Thanks
Thank you all for your suggestions. I did locate the wires to the sail switch. Unfortunately, I am unable to get to it because of it's location. It is in the rear of the furnace and I need to remove the unit from the camper.
So if I jump the wires for the sail switch it should open the valve?
I did check on the propane. Everything else works. Stove, water heater, fridge.
Thanks again.
Glenn