Furnace issue
My furnace (1995 Dutchmen) was blowing cold air when the heater was set to 90. I went and unplugged two wires on the furnace and heard the igniter turn on and it started working. Think there's a short...
Forum Discussion
Citti34 wrote:
Anyone?
Coleman Mach to Hunter
Don't find ANYTHING about a model 42997 ??? BUT you photo looks like my Hunter which is a 42999.
RED (12V DC +) connects to RH with a jumper to RC
BLUE (12V DC -) is NOT used
WHITE (Furnace) connects to 'W'
YELLOW (A/C Compressor) connects to 'Y'
GREEN (High Fan) I connected to 'G'
GRAY (Low Fan) I did not use because I always used High Fan anyway
Any other wires....not used
