Furnace issues
My Atwood 15/22 2 speed furnace is acting up. Battery voltage is 12.8v confirmed, but furnace lights up but burner then shuts down after a short period. The led at the furnace is blinking twice which ...
Forum Discussion
Update: After calling the tech rep I checked the sail switch and found nothing hindering its operation, so then I pulled out the electrode and checked the continuity of the electrode and wire to pc board, and the ceramic surround was not cracked...All looked clean and good except that the two electrode pair seemed to have too wide of a gap (about 1/4"), so I squeezed them a bit closer together (to about 1/8") and reinstalled electrode back into furnace...Now all works perfect again!!
Best Regards,
3 tons
Best Regards,
3 tons
