Fuse size pre-inverter
I've looked around and I've deduced that a slower-blow fuse, a Type T, is recommended between the battery bank and the inverter. I have two, group 27 batteries and I'm aimin' to install a 1000 watt in...
Forum Discussion
BoonHauler wrote:
RoyB seems to have things surounded IMO.
I used a class T in my set-up, I went with a 400A as per the Magnum spec.
High Amperage Inverter Fuses
This one, and its cousin with the bolt terminals (vs. bare cable terminals), are on my short list. I thought I'd call bestconverter.com tomorrow to check on their 110 amp Class T fuse and block (as mentioned in a previous post).
So, a potential issue with the 100 amp circuit breaker/Switch unit, is blowing too quickly during a surge. As opposed to a Class T that's slower to trip (something like 500 seconds at 150% of the rating).
