Fuse size question.
Having a time figuring out fuse size, so what size fuse do I need? What i'm doing is putting in a pos and neg bus bar to get rid of the mess of cables at the batteries so I was wanting to fuse the hot...
Forum Discussion
Joe417 wrote:
The starter wires (2 AWG cable) for the generator run directly to the battery terminals. No circuit breaker.
There is a 40 amp auto resetting circuit breaker protecting the battery from all camper circuits just before the disconnect.
There is a 40 amp auto resetting breaker after the disconnect.
There is a 40 amp auto resetting breaker feeding the jacks.
There is a 30 amp auto resetting breaker feeding the slide motor.
So if there is a 40 amp from the battery to disconnect then I should put a 40 amp fuse between battery and bus since all I am doing is breaking the line from the battery to disconnect and adding a bus bar in between right? Instead of all the cables hooked to the battery i'm putting a bus in between the lines and battery. But then again I have a 750 watt inverter drawing off the cables as well?
