Forum Discussion
Generator_Jim
Jul 23, 2013Explorer
Check continuity through the contacts. Should be close to 0 ohms.
If possible run a controlled amperage through it and determine trip point. Amp tripping value is stamped on part.
This may not be your problem but just one of the possibilities.
JimL
If possible run a controlled amperage through it and determine trip point. Amp tripping value is stamped on part.
This may not be your problem but just one of the possibilities.
JimL
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,262 PostsLatest Activity: Jun 08, 2025