Generac generator
Hi All Have a Generac PP-50, ran fine up to a few days ago, it will crank but wont start, It will if i give it a short of starting fluid and runs ok any help for an old bloke Thanks AL
Forum Discussion
Sounds like it is not getting gas soon enough. Mine has a priming switch at the local control you are supposed to hold for 10 seconds before starting, you hear the pump pumping gas to the generator. From the remote station it usually takes about the same amount of time to start. Could also be the choke not working correctly, which would make it harder to start. Mine was sticking and hard to start until I found the problem and fixed it. I have the Generac 5.5kW unit
