Sure thing!
I am using a DPL8x2 charger to charge RC aircraft LiPo batteries.
(http://www.revolectrix.com/dpl_specs_tab.htm)
The case I have the charger in contains a 24V 1800W Power Supply. I can run the charger off either AC (using the power supply in the case) or DC. I was told that I was better running it via AC.
Charging the following batteries:
http://www.horizonhobby.com/3200mah-3s-111v-30c-lipo-battery--12awg--ec3-p-kxsb0017
http://www.horizonhobby.com/5000mah-6s-222v-30c-lipo--10awg--ec5-p-kxsb0025
BUT, I am very new to all this, so if you have better suggestions, I am completely open!
Thank you,
David