Generator questions
We purchased a used class c this summer with built-in Generac generator. We used it several times and noticed the longer between uses the harder it is to start. The Generator was last run in mid Oct...
Forum Discussion
I don't know about the Generac, but I have an Onan 5500 and if it takes longer than 3-4 seconds to start then I didn't prime it long enough. To prime my Onan you push and hold the start button in the off position which after a slight delay activates the prime pump. I usually run this pump for 10-15 seconds or until it shuts off automatically. Then the crank time is 3-4 seconds.
