Generator/ Reverse Polarity Question
Hey folks, My knowledge on these matters is marginal at best so I am hoping someone here might have some suggestions regarding this issue I encountered today. I went to test my shiny new Surge...
Forum Discussion
enblethen wrote:
Yes, normally the larger blade is the neutral. Many gensets have no connection between neutral and ground. Wiring diagram shows pin 1 from inverter output has a circuit breaker in it. Typically this would indicate that pin 2 is the "floating neutral".
wnjj wrote:
Correct. The generator has no hot & neutral, just AC output. One becomes "neutral" once it is bonded to ground.
Thank you both! I will make sure it's not the twist lock adapter first and then I guess I'm going in lol Will update when that happens. Cheers!
