Forum Discussion
Salvo
Aug 22, 2015Explorer
Has the PD been redesigned? I haven't seen any PD that goes into constant current mode while in boost.
Constant current mode means the converter outputs rated current until converter voltage climbs to 14.4V (rated voltage). Only at this point in time current tapers.
The PD's I've seen slowly (perhaps in 1 to 2 hours) creep to 14.4V. The converter never outputs rated current for any duration.
The OP should verify charging current. Don't need to charge for hours by gen if it's not at rated current.
Constant current mode means the converter outputs rated current until converter voltage climbs to 14.4V (rated voltage). Only at this point in time current tapers.
The PD's I've seen slowly (perhaps in 1 to 2 hours) creep to 14.4V. The converter never outputs rated current for any duration.
The OP should verify charging current. Don't need to charge for hours by gen if it's not at rated current.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,329 PostsLatest Activity: Oct 28, 2025