Go-Power TS-30 30 Amp Transfer Switch

time2roll wrote:
Yes I think the linked fuse holder will work perfectly. Panel mount with access would seem to be the preferred set up.

Thanks for the feedback, I think I am going to bench test the fuse and see how well it works/looks/feels. for the cost of the fuse its worth testing.

3 tons wrote:

ibyers wrote:
Hey all, I know this is a older thread, but thought I would ask here first before starting a new thread.

I picked up this transfer switch and looking at the wiring diagram(s) it suggests to add a fuse to the Charger/converter circuit, However it really does not give more information than this.



Looking at fuse options, and other threads, a 15 amp fuse for this leg of the circuit seems to be the norm. That being said, would this fuse be ok? (I like the idea of drilling a hole in the case and mounting for easy access to the fuse).

Acouto Panel Mount Fuse Holder 5PCS Electrical Panel Mounted Screw Cap Fuse Tube Holder for 6x30mm Glass Fuses AC 125V 15A / 250V 10A

Amazon Canada Link

Well, per the diagram the fuse they are suggesting is between the charger and the battery (unrelated to the ATS...), so in this case the fuse size would be dependent on the rated output of the charger, plus say 10%...But your charger may already have such a fuse (a blade type fuse) integral on it’s body...

3 tons

Hi 3 Tons, the fuse I am referring to is inside the one transfer box. Top left corner of the box.

.

otrfun wrote:
Thinking about installing a Go-Power TS-30 (30 amp) transfer switch in our camper. Anyone aware of any particular pros and cons about this unit? Other model transfer switches we should consider? Thanks.

Not sure if this feature is available in other transfer switches, but I noticed the TS-30 has the option to route the AC input to the converter through the TS-30. When the inverter is active the TS-30 automatically shuts off power to the converter.

I have the Go power system in my 5th wheel. I did have the TS-30 but I killed it and put in the TS-50. I did get it swapped out for free as they never should have put a 30amp transfer switch in a 50amp system.... there mistake when they installed it so they made good. other than they they work great , Go-Power when they were canadian owned and operated were kowen for high quality even if they were a bit on the expensive side. not sure if the quality has changed now that they are american owned.


Steve

Yes I think the linked fuse holder will work perfectly. Panel mount with access would seem to be the preferred set up.

ibyers wrote:
Hey all, I know this is a older thread, but thought I would ask here first before starting a new thread.

I picked up this transfer switch and looking at the wiring diagram(s) it suggests to add a fuse to the Charger/converter circuit, However it really does not give more information than this.



Looking at fuse options, and other threads, a 15 amp fuse for this leg of the circuit seems to be the norm. That being said, would this fuse be ok? (I like the idea of drilling a hole in the case and mounting for easy access to the fuse).

Acouto Panel Mount Fuse Holder 5PCS Electrical Panel Mounted Screw Cap Fuse Tube Holder for 6x30mm Glass Fuses AC 125V 15A / 250V 10A

Amazon Canada Link

Well, per the diagram the fuse they are suggesting is between the charger and the battery (unrelated to the ATS...), so in this case the fuse size would be dependent on the rated output of the charger, plus say 10%...But your charger may already have such a fuse (a blade type fuse) integral on it’s body...

3 tons

deleted

Those fuse holders don't look especially well-made, nor is there any indication that they have regulatory approvals. I would be hesitant to use it for a relatively high-current application (like the converter).

Ideal would be to put in a small one or two breaker subpanel, or a plug fuse holder. The latter are getting relatively hard to find, but they are available in single handy box size. "Plug fuses" are the old-fashioned screw-in type that look something like the base of a standard light bulb.

Hey all, I know this is a older thread, but thought I would ask here first before starting a new thread.

I picked up this transfer switch and looking at the wiring diagram(s) it suggests to add a fuse to the Charger/converter circuit, However it really does not give more information than this.



Looking at fuse options, and other threads, a 15 amp fuse for this leg of the circuit seems to be the norm. That being said, would this fuse be ok? (I like the idea of drilling a hole in the case and mounting for easy access to the fuse).

Acouto Panel Mount Fuse Holder 5PCS Electrical Panel Mounted Screw Cap Fuse Tube Holder for 6x30mm Glass Fuses AC 125V 15A / 250V 10A

Amazon Canada Link

Forgot to mention I'll be installing the TS-30 in an in-bed camper with no on-board generator. I'll be manually switching from shore power to a portable generator and back using the camper's 30 amp power cord. So no need for a generator/shore power transfer switch.

Found this on the gpelectric.com website. Little more detail here. I believe the TS-30 is going to work just fine for our particular application. It clearly shows NC for the inverter and NO for the converter.