Grease in EZ lube dust cap
One EZ Lube hub seems to be pushing grease out into the dust cap. Bearings were "professionally" serviced last season. No grease on back of wheel. Ideas? Will pull apart myself and inspect if neces...
Forum Discussion
StirCrazy wrote:Cummins12V98 wrote:
Don't understand your comment "that's not really making sense, pump and spin is the way you're supposed to fill the ez-lube."
It's Tie Down Engineering but now owned by Dexter. Changed out the POS spring, axles and drums with Dexter Tork Flex 3,750#. 5 or 6 year 100k warranty on the hubs, no maintenance required. I did have 3 fail so I am now annually greasing with Lucas Marine as per warranty.
Also HydraStar Hydraulic Actuator.
don't worry about it, I misunderstood what you were saying. so, I imaging that was more expensive than just buying the dexter disc break upgrade they offer for 2500Cdn for the 4 rotors , break kits and hydraulic to electric set up.
All in I have $3,500 into axles, hubs, brakes and actuator all Marine Grade. Worth EVERY $$$$$$$. I absolutely hated the drums with surge. I washed them out after every trip to the salt water but they just went to SH!T. I have brakes right away as when pulling Boat out I reach down and hit the oH SH!T slide on the brake controller for a few seconds to dry off the water and have brakes as needed!!!
