grounding new 12v branch circuit
My 12v dist. panel has a fused branch circuit that is not used. I would like to add a few small lights from that lead. My question is, what is the proper, safe way to ground it?. ...Hot wire to the sw...
Forum Discussion
all 12vdc circuits in the RV
have 2 wires
both the positive and the negative
rv house circuits, do NOT use the frame grounding method that Vehicles use
insde the converter you will find a NEGATIVE bus
it will NOT be grounded to the RV frame
yes the battery is, but the 12v circuits are wired with 2 wires from the converter/fuse panel
its possible you will find all the Negatives, fastened/connected together inside or behind the converter
have 2 wires
both the positive and the negative
rv house circuits, do NOT use the frame grounding method that Vehicles use
insde the converter you will find a NEGATIVE bus
it will NOT be grounded to the RV frame
yes the battery is, but the 12v circuits are wired with 2 wires from the converter/fuse panel
its possible you will find all the Negatives, fastened/connected together inside or behind the converter
