grounding new 12v branch circuit
My 12v dist. panel has a fused branch circuit that is not used. I would like to add a few small lights from that lead. My question is, what is the proper, safe way to ground it?. ...Hot wire to the sw...
Forum Discussion
Mine is actually in the cabinet behind the converter:
Here is the converter:
Here is the compartment behind the converter, accessible by removing the bottom shelf in the pantry:
This is the 12v negative bus, the thick black wire runs down to the frame:
Here is the converter:
Here is the compartment behind the converter, accessible by removing the bottom shelf in the pantry:
This is the 12v negative bus, the thick black wire runs down to the frame:
