grounding new 12v branch circuit
My 12v dist. panel has a fused branch circuit that is not used. I would like to add a few small lights from that lead. My question is, what is the proper, safe way to ground it?. ...Hot wire to the sw...
Forum Discussion
Running dedicated (+) and (-) wires from source, through load and back to a ground bus, will certainly add a degree of reliability and problem solving flexibility, but EVERY RV I have ever worked on (there have been many dozen) have had the AC an DC systems BOTH ultimately GROUNDED to the vehicle frame.
Just for clarification and simplification, the ac neutral and ground should NEVER be bonded (connected together) in an RV. The ac GROUND should always be connected to the frame ground, but the ac neutral should NEVER be.
Just for clarification and simplification, the ac neutral and ground should NEVER be bonded (connected together) in an RV. The ac GROUND should always be connected to the frame ground, but the ac neutral should NEVER be.
