heater AC same time
Ok, it's cold outside. hovering 31. I turn on the Heater, set it to 58 degrees. It clicks on, BUT so does the AC. And the AC is cold. I have tried cycling thru the settings. Changing the temp. Turned ...
Forum Discussion
Thermostat...
Set FAN to auto'
Set to HEAT mode
Set temp to higher temp then room temp is
T-stat should 'click. and then furnace fan should come on and blow for 30-90 seconds THEN burner click and flame ignition
If you haven't used in a while it may take several attempts due to lack of propane flow at furnace
Furnace is ALL 12V DC......so when you turn t-stat on and no fan starts then check DC Fuses in DC Dist Panel (converter)
Set FAN to auto'
Set to HEAT mode
Set temp to higher temp then room temp is
T-stat should 'click. and then furnace fan should come on and blow for 30-90 seconds THEN burner click and flame ignition
If you haven't used in a while it may take several attempts due to lack of propane flow at furnace
Furnace is ALL 12V DC......so when you turn t-stat on and no fan starts then check DC Fuses in DC Dist Panel (converter)
