HELP! Honda2000's in parallel overloading....
Hi all....tried to "boondock" on the side of the road and one of my 2 Hondas keeps overloading and shutting down. I'm using the Honda parallel kit wired into a standard 30amp receptacle/box made for...
Forum Discussion
I agree with Flyfasteddie.
The extended fuel tank needs an open vent as the gas is withdrawn by the generators.
The gas cap on the generators needs to be hand tight/air tight or it will not draw gas from the extended run tank.
If the extended run tank does not have a vent, loosen the fill cap a little.
It needs to pull air in.
Pat
The extended fuel tank needs an open vent as the gas is withdrawn by the generators.
The gas cap on the generators needs to be hand tight/air tight or it will not draw gas from the extended run tank.
If the extended run tank does not have a vent, loosen the fill cap a little.
It needs to pull air in.
Pat
