Here Ya Go Landyacht !
https://www.ebay.com/itm/220-AMP-HIGH-POWER-Watt-HOUR-Meter-BIG-WIRE-HEAVY-8-AWG-Solar-Wind-Turbine/232606182993?hash=item362868ae51:g:SgAAAOSwBjdaPewt NOW READ'S KWH (hours) so you can track...
Forum Discussion
Im pulling the battery down quickly now and will shoot wires with IR gun later tonight when maxing out Meanwell.
The 45 amp Anderson powerpoles I used in the connector are among the first ones I ever assembled. I did not have the proper crimper tool for the Anderson 45 amp terminals. Now I do.
I was not really gettng the comnpression I wanted when crimping as my other crimpers could all too easily distort the contacts where they mate I Would cover the crimp with solder, but my soldering skills then are not what they are now.
Since I can just turn up the dial a smidge more, the heating and extra resistance are not really any concern. I look at the voltmeter on the battery terminals when I reach constant voltage mode, not the wattmeter close to the MW output.
The meanwell also has voltage sensing, but I have not bothered hooking it up.
The 45 amp Anderson powerpoles I used in the connector are among the first ones I ever assembled. I did not have the proper crimper tool for the Anderson 45 amp terminals. Now I do.
I was not really gettng the comnpression I wanted when crimping as my other crimpers could all too easily distort the contacts where they mate I Would cover the crimp with solder, but my soldering skills then are not what they are now.
Since I can just turn up the dial a smidge more, the heating and extra resistance are not really any concern. I look at the voltmeter on the battery terminals when I reach constant voltage mode, not the wattmeter close to the MW output.
The meanwell also has voltage sensing, but I have not bothered hooking it up.
