Hot Ground???
Alright, so after replacing my batteries I thought that our problems were solved. Especially when we arrived after two weeks to fully charged batteries in the storage yard(The refrigerator was hot how...
Forum Discussion
Alright so I started tracing the wire like you suggested and I came to this mess connected with one of those twist on deals and tapped up. When I hooked each one up individually, normal amp draw at the battery. With both at the same time 10 amps. So I hooked up the one that was the fridge and left the other one disconnected, both tapped up of course. I don't know what that line is running to but I haven't noticed anything else not working yet. Even the compartment lights still function. I assume that is probably not the proper way to hook those three wires together and that's why there is a problem. Suggestions?
The controller for the panels hooks directly to the batteries and is functioning just fine. As you said the fridge is not pulling 10 amps, only 0.335 amps or so.
I feel like I pretty much got this baby licked at this point :B, not much further to go now :) Thanks again for the help.
Tim Czarkowski
TotalTravelers.com
The controller for the panels hooks directly to the batteries and is functioning just fine. As you said the fridge is not pulling 10 amps, only 0.335 amps or so.
I feel like I pretty much got this baby licked at this point :B, not much further to go now :) Thanks again for the help.
Tim Czarkowski
TotalTravelers.com
