Hot Water Heater
Can someone tell me the sequence used to get the hot water tank going on a Fleetwood Southwind ? I found the 2 brown wires and one that was either blue or green all melted when I went out to check to...
Forum Discussion
Atwood units (which I believe you have) use brown, blue and green. Brown is +12 volt from the switch, blue is a return line from the heater (ignition control module, a.k.a. board) to a fault light, and green is ground.
I have the service manual on my service manual page, and the owners manual on my owners manual page.
I have the service manual on my service manual page, and the owners manual on my owners manual page.
