how hydraulic slide
How can I check to see if voltage to pump is enough m..slide is very slow..mcant find a bind, has fluid, can't find any leaks 1997 Winnebago vectra , Chevy workhorse Thanks in advance
Forum Discussion
well
may have found one of the issues not sure but gonna go with it.
This is the 610 HWH system : Leveler , jacks, stairs
The master relay on the motor: The post on where the HOT from the battery had play in it. The cable was not loos but the post had play in it. Tried to remove cable to see if I could tighten back nut and post broke off. Seems to be some evidence of heat(black).
So Im gonna replace the Master Relay and go ahead and replace the pump relay and check the wiring.
Master Relay I cannot read any numbers. It is a 4 post. Looking at the HWH site it appears to be WHITE RODGERS® ESSEX #124-105111.
Also, i cant identify the Pump Relay numbers. It is also 4 post and appears to be PRESTOLITE® # SAZ-4201ER
When looking these up on google they say both the relays are 100 amp. Does that sound correct?
may have found one of the issues not sure but gonna go with it.
This is the 610 HWH system : Leveler , jacks, stairs
The master relay on the motor: The post on where the HOT from the battery had play in it. The cable was not loos but the post had play in it. Tried to remove cable to see if I could tighten back nut and post broke off. Seems to be some evidence of heat(black).
So Im gonna replace the Master Relay and go ahead and replace the pump relay and check the wiring.
Master Relay I cannot read any numbers. It is a 4 post. Looking at the HWH site it appears to be WHITE RODGERS® ESSEX #124-105111.
Also, i cant identify the Pump Relay numbers. It is also 4 post and appears to be PRESTOLITE® # SAZ-4201ER
When looking these up on google they say both the relays are 100 amp. Does that sound correct?
