How I remove and install axle grease caps
Short and sweet...60 seconds. Not much to write here so just posting a link to the video. If you have any tips to do it easier chime in. I'm certainly no mechanic, but this has been working well ...
Forum Discussion
RVhiker wrote:
I put a medium sized slot screwdriver where the lip of the cap meets the axle and tap gently; the cap separates a bit and then the screwdriver can pry off the cap. I use a gently applied rubber mallet to tap the cap back on. My caps don't dent, and they last forever. Of course, dented they last forever, too.
Same here
