Forum Discussion

Horizon170's avatar
Horizon170
Explorer
Sep 24, 2016

How much Eternabond and Dicor

Grainger Ind. Supply has the product. I see that they have rolls and also Kit a Kit which has 4" X 5'. I have never used it so I would like someone to explain the cleaning before application process. If I can clean with home products then I can get a larger roll rather than the Kit. That way I can have some spare for other emergencies.
Thanks

10 Replies

  • Mike S and Jimnln, Thanks, I will Vacuum pak after opening in order for Sweetie to allow it in Fridge/Freezer. smiles
    Marvin
  • mike-s wrote:
    Horizon170 wrote:
    OK, I'm all set on Eternabond--where to buy, how to use, etc, but now I need to know if I buy a tube of DICOR and use only a small amount, how long will the rest keep and how to store an opened tube.
    Not long. Plug the tip well, and keep it in the freezer, and a bit longer.

    I keep all my sealants in the fridge. They last for years if the snipped end is sealed good.
  • jplante4 wrote:
    Clean with minerals spirits. The surface has to be absolutely dry or the tape will not stick.

    Also, seal the edges with Dicor self-leveling lap sealant.



    Acetone works very well too..
  • Horizon170 wrote:
    OK, I'm all set on Eternabond--where to buy, how to use, etc, but now I need to know if I buy a tube of DICOR and use only a small amount, how long will the rest keep and how to store an opened tube.
    Not long. Plug the tip well, and keep it in the freezer, and a bit longer.
  • OK, I'm all set on Eternabond--where to buy, how to use, etc, but now I need to know if I buy a tube of DICOR and use only a small amount, how long will the rest keep and how to store an opened tube.
    Thanks, Marvin
  • They do sell a cleaner and primer, but a good clean and scrup is normally enough, use a roller for applications, also available on line.
    Frank
  • Check out Amazon as well. I just bought some and was working on it today. When you add up all the seams, you go through a lot!
  • Clean with minerals spirits. The surface has to be absolutely dry or the tape will not stick.

    Also, seal the edges with Dicor self-leveling lap sealant.
  • metal and fiberglass
    i wash, rinse really well
    scrub with scotch brite
    rinse again

    any chalkiness or film, has to be totally removed
    no loose flaky paint or caulking

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,363 PostsLatest Activity: Mar 04, 2026