HWH 325A Circuit Board
Hi all, Has anyone removed the circuit board from the control box on an HWH leveling system? Mine is a 325a system and I can see, and have removed, 2 screws from the bottom edge of the board but it...
Forum Discussion
enblethen wrote:
MP85.2215 somewhat shows squeeze type retainers on the long side of some of the connectors and one indicates a spring type latch retainer.
Manual
Thanks for that. The CN2 connector is the only one I've tried to remove. The top latch is missing and I can undo the bottom one but the connector just won't budge. Some of the problem is the awkward angle I'm forced to work at. I guess I'll just have to try harder. It seems the PC board is faulty and if I can get a replacement or have this one repaired, all those connectors need to come off. Ugh.
I've looked through every service doc I can find at HWH and none of them discuss removing that PC board. I guess it's not the big deal I think it is.
Thanks again,
Eric
