HWH 325A Circuit Board
Hi all, Has anyone removed the circuit board from the control box on an HWH leveling system? Mine is a 325a system and I can see, and have removed, 2 screws from the bottom edge of the board but it...
Forum Discussion
Yup. Here's quote from that section
"If the YELLOW and RED LED’s are lit check the correct pins
in the BROWN CN2 connector for +12 and ground. If +12
or ground is not present replace the control box."
All the LEDs are lit but I do not have +12 at pin 5 of the connector. It's telling me to replace the control box, which is essentially the PC board. Before I buy one, if I can buy one, I want to try and see if I can perform a simple fix. Either way, I need to remove those connectors.
"If the YELLOW and RED LED’s are lit check the correct pins
in the BROWN CN2 connector for +12 and ground. If +12
or ground is not present replace the control box."
All the LEDs are lit but I do not have +12 at pin 5 of the connector. It's telling me to replace the control box, which is essentially the PC board. Before I buy one, if I can buy one, I want to try and see if I can perform a simple fix. Either way, I need to remove those connectors.
