HWH 325A Circuit Board
Hi all, Has anyone removed the circuit board from the control box on an HWH leveling system? Mine is a 325a system and I can see, and have removed, 2 screws from the bottom edge of the board but it...
Forum Discussion
This is a shot of the connector, CN2. The smaller brown part attached to the orange part with the wires sticking out of it is what I'm trying to pull out. The larger brown part is screwed onto the back of the silver metal box that holds the PC board. I'm just unclear on what's supposed to happen here because I can't find a picture of the other side of the piece I'm yanking on.
I think, the smaller brown part I'm tugging on is not directly connected to the back of the PC board. Instead It connects to the larger brown piece which in turn connects to the PC board. This is done to protect the board from the elements, I think.
Basically, I was hoping someone who has done this can reassure me. I scared because I think that PC board is made of unobtainium and I don't want to crack it. I think I can fix it if I can remove it.
