NAH! Got it topped! I was trying to replace the gas valve in an Atwood. The thing wouldn't turn so I thought I'd heat it with my propane torch. And that having a little water in the tank would protect all but the area I was heating around the stem of the valve. After awhile, valve still stuck, I notice the plastic drain plug is dripping. I loosen the plug...BOOM...GUSH...Steaming Hot Water...Soaked but Not Burned...Water Cut Trench in Grass...Never found Plug...
After I calmed down and IT cooled down, heated again, same spot, but with plug out so no water to absorb the torch heat. Valve came right out.