myredracer wrote:
I did the exact same swap a few years ago and it fit no problem. I remember looking at the PD at first and thinking it was way too large but it slipped right in perfectly.
The black bracket on the floor of the WFCO housing doesn't look right. Perhaps that's for a Magnetek or Parallax converter? According to PD instructions, there is a bracket but it doesn't look as tall.
A call to Randy @ bestconverter.com might provide the answer. Or PD's instructions are ***Link Removed***
Since 2oldman resized your pics, you should delete yours as they are waay too large to fit on the screen.
Thanks for the feedback. I removed the pics for viewability.
The black bracket is what mounts/secures the converter to the box. I actually spoke to Randy yesterday about it, because initially I was trying to install the converter backward (heatsink forward, just like my old converter)... Unfortunately, I wasn't at my trailer when we talked, so I didn't discover this issue until later. I planned to call or email Randy about this one, but thought I'd try here first since I assumed he wouldn't respond on a Saturday night/Sunday (It would have been after 11 where he's located by the time I figured this issue out).
