Installing a new capacitor in my Coleman A/C
I'm installing a new start capacitor in my Coleman A/C (model 8335D8764). The capacitor is the Supco SPP6, which seems like a pretty popular option. I went up on the roof of my 5'er yesterday and to...
Forum Discussion
Hi,
I have been reading this thread (and others) with great interest and I have a few related questions and hopefully not too much redundancy. I thought I'd ask here as opposed to starting a new thread since there is much related information already here. I would appreciate it if the persons here could clear up some confusion for me.
I have a 2009 Jayco TT with a Coleman 13500 AC model 8333D8764.
I am very interested in installing a Supco SPP6 / SPP6E capacitor mod for easier starting of the AC. I currently have a Honda EU2000i (not the companion) and if at all possible I'd like to have the Honda run the AC with no other loads running. If not possible, then I'd still like to install the Supco if there could be a benefit at a later date when I'm able to acquire another EU2000i.
From reading past threads it appears that my AC has a hard start kit already installed:
8 (8000 series)
3 (standard profile)
3 (non-exhaust model)
3 (13,500 btu)
d (model revision number)
8 (Tecumseh compressor)
7 (PTCR/Capacitor start kit)
6 (Arctic white)
4 (It was shipped on a skid, does have a logo)
The question is, what Supco unit would I install in this unit, the SPP6 or the SPP6E, and would I remove the existing PTCR/Capacitor start kit? If so, how do I identify those existing components that will be replaced?
Would this mod actually be worth doing on my AC unit? What are my chances of running the AC on one EU2000i?
Thanks to everyone for the information already posted here and thanks in advance for any help and advice that anyone can give.
Bluegrass Picker
I have been reading this thread (and others) with great interest and I have a few related questions and hopefully not too much redundancy. I thought I'd ask here as opposed to starting a new thread since there is much related information already here. I would appreciate it if the persons here could clear up some confusion for me.
I have a 2009 Jayco TT with a Coleman 13500 AC model 8333D8764.
I am very interested in installing a Supco SPP6 / SPP6E capacitor mod for easier starting of the AC. I currently have a Honda EU2000i (not the companion) and if at all possible I'd like to have the Honda run the AC with no other loads running. If not possible, then I'd still like to install the Supco if there could be a benefit at a later date when I'm able to acquire another EU2000i.
From reading past threads it appears that my AC has a hard start kit already installed:
8 (8000 series)
3 (standard profile)
3 (non-exhaust model)
3 (13,500 btu)
d (model revision number)
8 (Tecumseh compressor)
7 (PTCR/Capacitor start kit)
6 (Arctic white)
4 (It was shipped on a skid, does have a logo)
The question is, what Supco unit would I install in this unit, the SPP6 or the SPP6E, and would I remove the existing PTCR/Capacitor start kit? If so, how do I identify those existing components that will be replaced?
Would this mod actually be worth doing on my AC unit? What are my chances of running the AC on one EU2000i?
Thanks to everyone for the information already posted here and thanks in advance for any help and advice that anyone can give.
Bluegrass Picker
