Installing new front shocks
E450 Super Duty V-10 FORD Class C Is it a possibility that to replace the front shocks the steering gear box would have been removed to make room to install the shocks on this chassis?
Forum Discussion
mikebo wrote:
I didn't when I put bilsteins on the 2010 Jayco Melbourne (ford e450 with v10) I used to own. The drivers side front was very difficult to get wrenches on, but with some patience it's possible.
Two days ago I just finished installing HD Bilsteins on my Van and as mentioned the driver's side top nut is hard to get to, but if you get the GearWrench pass thru flex head ratchet socket set it makes the job a heck of a lot easier. Also, soak all the nuts for a day or two with PB Blaster also makes it easier.
Larry
