Interest in mismatched panel test?
Ever since I got my first set of mismatched panels, seeing then react to different conditions convinced me they would interfere with a MPPT controllers ability to track. With the TS-MPPT-60 I could lo...
Forum Discussion
You can make separate data from the one just by deleting the rows and saving the data with a new file name. You may then need to re set up the graph. This is with the csv data. Not sure if you used Excel or the MSView graph.
Battery or load demand might have caused the lower than expected amps.
Plus I wonder about using panels with different Imp/Vmp and different technology. If higher voltage occurs on one panel due to the different panels then the amps drop off very quick from the ideal MP point for than panel and hence all panels in series. I'm referring to the right of the MP point on the IV curves.
ie Just wondering how the MPPT algorithm optimized for maximum power with a mixed panel setup. :h
Battery or load demand might have caused the lower than expected amps.
Plus I wonder about using panels with different Imp/Vmp and different technology. If higher voltage occurs on one panel due to the different panels then the amps drop off very quick from the ideal MP point for than panel and hence all panels in series. I'm referring to the right of the MP point on the IV curves.
ie Just wondering how the MPPT algorithm optimized for maximum power with a mixed panel setup. :h
