Inverter AGM questions
I have been thinking about installing a inverter in my truck, either a 2000-3000 watt. I would use it to run small power tools, air compressor, an electric blanket when on the ferry system as you can'...
Forum Discussion
Made a little more progress, I received the 1/0 DLO cable and was able to run a 1/0 negative from under the center console, drilled the holes through the truck floor for the wiring for the 120v 50 amp shore power, 30 amp outlet from inverter, charge line from truck alternator and to lift gate plug mounted in the bed of the truck.
I got the enclosure mounted in the back seat area, it bolts to the mounts for the rear seats and seat belts. Still have to finish covering the top of the enclosure, ordering batteries soon now that I have a spot to put them.
Inverter enclosure install
I got the enclosure mounted in the back seat area, it bolts to the mounts for the rear seats and seat belts. Still have to finish covering the top of the enclosure, ordering batteries soon now that I have a spot to put them.
Inverter enclosure install
