Inverter grounding to batt or chassis
I'm looking for some input regarding the ground (negative, not neutral) connection for my 1800 watt inverter. I need about 10 of wire to run it back to the battery or I can ground it to the motor hom...
Forum Discussion
I measured the R of my 5er's frame to be 0.013 ohms. Adding the copper pipe got that down to 0.0014 The pos path was reduced to 0.006 with wires.
The R stays the same. More amps means more voltage drop.
Attaching the linking wires to the frame is the "weak link" where corrosion at the frame can develop
The R stays the same. More amps means more voltage drop.
Attaching the linking wires to the frame is the "weak link" where corrosion at the frame can develop
